$379.00 – $1,159.00Price range: $379.00 through $1,159.00
$379.00 – $1,159.00Price range: $379.00 through $1,159.00
Built around a meteorite-pattern dial, this Rolex Daytona 126515LN Meteorite replica stands apart from the other Everose Cosmographs in the range. On the genuine watch the dial is cut from iron-nickel meteorite with a natural Widmanstätten structure, so no two pieces look identical; this replica reproduces that crystalline grain as a dial pattern. The 126515LN houses this unusual face inside a 40mm Everose gold case, complemented by a black Cerachrom bezel and Oysterflex bracelet. It is one of the few Daytona configurations where the dial genuinely dominates the visual identity of the watch.
The Everose gold case contrasts sharply against the grey, textured meteorite surface. Under different angles, the pattern shifts, giving this Oysterflex version a living quality that a flat lacquered dial cannot match.
Inside the super clone sits a clone Cal. 4131, a column-wheel chronograph with vertical clutch coupling and a 72-hour power reserve. This architecture delivers smooth seconds-hand sweeps when the chronograph engages, without the jump or stutter common in horizontal-clutch designs; our Clean factory versus BT factory Daytona notes explain how the clone reproduces it. The automatic winding rotor keeps the mainspring tension consistent. For a Daytona meteorite dial comparison, consider the chocolate dial 126515LN that shares the identical case and bracelet but swaps meteorite for warm brown. More options across the lineup sit in our Daytona collection.
Meteorite dials appear across several Rolex families, and on the Daytona the subdials break the pattern into distinct zones. Here three black counters sit on the grey grain inside an Everose case, while the 126518LN Meteorite pairs the same dial idea with yellow gold for a warmer contrast. This Rolex Daytona 126515LN Meteorite replica keeps the Everose case, black ceramic bezel and Oysterflex of its chocolate and Sundust siblings, so the grey grain is the only part that changes.
Only the gold differs: the 126515LN uses Everose for the case, crown and pushers, the 126518LN uses yellow gold, and both share the meteorite-pattern dial, black counters, ceramic bezel and Oysterflex. Next to the pink tone of Everose the grey dial looks cooler than it does beside yellow gold.
The super clone costs $1,159 with the clone Cal. 4131, and an A-grade version with a Japanese automatic movement costs $379. From the outside both are the same Everose meteorite Daytona copy, so you pay the difference for what runs inside the case.
Other versions of this model in stock: Rolex Daytona 126515LN Chocolate Dial, Rolex Daytona 126515LN Sundust Dial, Rolex Daytona 126515LN Black Dial.
| Feature | Superclone | AAA grade | A grade |
|---|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±10–15 s/day | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Hybrid Asian 2824/2836/Seagull base with cosmetic plates | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Slight grain; audible rotor in quiet rooms | Grittier; common rotor noise |
| Power reserve | 60–72 h | 40–55 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L with good finishing | 316L basic finishing |
| Crystal | Sapphire, decent AR | Sapphire (some single-AR) or mineral on cheaper lines | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | 30–50 m rated | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Within ~±15–25 g | Noticeably off |
| Feature | Superclone | A grade |
|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Grittier; common rotor noise |
| Power reserve | 60–72 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L basic finishing |
| Crystal | Sapphire, decent AR | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Noticeably off |
$849.00 – $1,299.00Price range: $849.00 through $1,299.00
$399.00 – $430.00Price range: $399.00 through $430.00
We have 500+ models not shown on website. Message us!
Order preparation & inspection
Swiss Premium Movement
Before shipping for approval
Express delivery (Tax Free)
WhatsApp us
We have 500+ models not shown on website. Message us!
Order preparation
Chronological inspection
Swiss Premium Movement
Before shipping for approval
Express delivery (Tax Free)
Superclone-grade replica watches. Swiss movements, 904L steel, sapphire crystal. Every piece QC'd before shipping.
Exclusive deals and new arrivals. No spam — just watches.