$379.00 – $1,159.00Price range: $379.00 through $1,159.00
$379.00 – $1,159.00Price range: $379.00 through $1,159.00
This Rolex Daytona 126515LN Black Dial, reference M126515LN-0002, mounts a black dial with Sundust counters inside a 40mm Everose gold case, paired with the Oysterflex rubber bracelet and a black Cerachrom ceramic bezel. The 126515LN family represents the Cosmograph’s precious-metal-on-rubber formula, and the -0002 variant uses a two-tone split between deep black and warm Sundust accents that creates a dial face unlike any steel Daytona. The moulded tachymetric scale on the ceramic bezel remains legible at all angles, and the Oysterflex bracelet provides a lighter, sportier wrist feel than a metal link alternative would allow.
The Sundust tone on the three counters is a pale pink-gold that shifts depending on ambient light. The black main dial frames those counters, adding depth and separating the elapsed-time readings from the central time display.
The super clone inside the 126515LN uses a clone Cal. 4131 with a vertical clutch and column wheel configuration. Its power reserve is 72 hours, the figure Rolex gives for Cal. 4131, and the high beat rate maintains smooth chronograph hand sweep during timing operations; our factory guide has the column wheel and vertical clutch clone explained step by step. The ceramic bezel resists fade, scratching, and UV degradation in ways that earlier aluminum and gold bezels could not. The oysterflex daytona platform appeals to anyone who wants precious metal without the weight of a full gold bracelet. For contrast with the older precious-metal formula, the 116509 with a black Arabic dial pairs an engraved white gold bezel with a metal Oyster bracelet. Across the Daytona collection, the 126515LN variants are the Everose rubber-strap option.
The black-and-Sundust dial distinguishes the 126515LN-0002 from the Sundust-dial -0006 variant, which reverses the colours with a pale pink dial and black counters. Here the contrast between the dark main dial and the warm counters creates a layered look that shifts character as light changes. The Oysterflex bracelet keeps total wrist weight below what a full rose gold Oyster would impose. This replica Daytona 126515LN-0002 offers the black-and-Sundust variation of the rose gold Oysterflex Cosmograph for those who want visible tonal contrast on their wrist.
The M126515LN-0002 does: a black dial, three Sundust counters and applied stick indexes, with no stones anywhere on the face. The M126515LN-0004 keeps the same colours but sets eight hour markers with stones, which is the quickest way to tell the two apart in a photo.
Decide by movement: the $1,159 super clone runs a clone Cal. 4131 with a column-wheel chronograph, and the $379 A-grade runs a Japanese automatic. On this Everose and Oysterflex copy both options keep the black-and-Sundust dial and the ceramic bezel.
Other versions of this model in stock: Rolex Daytona 126509 Silver Dial, Rolex Daytona 126515LN Chocolate Dial, Rolex Daytona 126515LN Meteorite.
| Feature | Superclone | AAA grade | A grade |
|---|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±10–15 s/day | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Hybrid Asian 2824/2836/Seagull base with cosmetic plates | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Slight grain; audible rotor in quiet rooms | Grittier; common rotor noise |
| Power reserve | 60–72 h | 40–55 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L with good finishing | 316L basic finishing |
| Crystal | Sapphire, decent AR | Sapphire (some single-AR) or mineral on cheaper lines | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | 30–50 m rated | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Within ~±15–25 g | Noticeably off |
| Feature | Superclone | A grade |
|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Grittier; common rotor noise |
| Power reserve | 60–72 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L basic finishing |
| Crystal | Sapphire, decent AR | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Noticeably off |
$379.00 – $1,159.00Price range: $379.00 through $1,159.00
$349.00 – $879.00Price range: $349.00 through $879.00
$849.00 – $1,299.00Price range: $849.00 through $1,299.00
We have 500+ models not shown on website. Message us!
Order preparation & inspection
Swiss Premium Movement
Before shipping for approval
Express delivery (Tax Free)
WhatsApp us
We have 500+ models not shown on website. Message us!
Order preparation
Chronological inspection
Swiss Premium Movement
Before shipping for approval
Express delivery (Tax Free)
Superclone-grade replica watches. Swiss movements, 904L steel, sapphire crystal. Every piece QC'd before shipping.
Exclusive deals and new arrivals. No spam — just watches.