$659.00
$659.00
Built around a second time zone, this Breitling Navitimer GMT replica offers the Navitimer silhouette at 41mm, a more restrained diameter than the standard 43mm B01 models. The ice blue dial, paired with a stainless steel case and a blue alligator strap, keeps the classic slide rule bezel intact while bringing the overall proportions closer to a mid-size travel watch than to a chronograph. Inside the hour markers runs a 24-hour scale, and a fourth central hand with a blue arrow tip points to it, so a second time zone reads at a glance. Reference A32310171C1P1 suits wrists that measure below 18cm or anyone who prefers a pilot’s watch that does not dominate the shirt cuff. Our pilot’s watch guide includes a short note on the Navitimer GMT and its second time zone.
Unlike the B01 chronograph variants, this 41mm Navitimer runs four central hands plus a date, the fourth being a GMT hand that circles the dial once a day. The absence of sub-dials gives the blue surface more visual breathing room, which makes the slide rule markings around the bezel edge stand out more prominently.
The movement inside this reference is a clone Cal. Breitling 32, an automatic caliber with a date, a 24-hour GMT hand and no chronograph function. That distinction matters because it changes the entire dial layout: no pusher stack on the case side, no sub-registers breaking up the dial, and a thinner overall case profile. Compared to the A17327381B1P1 in 36mm, this 41mm keeps the same sub-dial-free face but adds a GMT hand and a date, and scales it for a larger wrist. The clone calibre stores about 40 hours of power reserve, a little under the 42 hours Breitling quotes for the genuine Cal. Breitling 32, and on a GMT of this type the 24-hour hand is set separately from the main hands. Browse the full Navitimer lineup to see how the collection splits between chronograph and time-only references across multiple case sizes.
The chronograph models get most of the attention in the Navitimer range, which means the 41mm GMT versions often go under the radar. That is exactly what makes the A32310171C1P1 interesting. Breitling kept the rotating slide rule bezel, which still works for speed, distance and fuel calculations, creating a watch that looks like a pilot’s instrument but wears like a slim daily driver. That gives the distinctive Navitimer look without the thickness and complexity of a full chronograph stack, plus a second time zone the chronographs do not offer.
On a trip, leave the GMT hand on home time and move only the main hands: the 24-hour scale then tells you at a glance whether it is day or night at home, and the date follows local time.
| Feature | Superclone | AAA grade | A grade |
|---|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±10–15 s/day | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Hybrid Asian 2824/2836/Seagull base with cosmetic plates | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Slight grain; audible rotor in quiet rooms | Grittier; common rotor noise |
| Power reserve | 60–72 h | 40–55 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L with good finishing | 316L basic finishing |
| Crystal | Sapphire, decent AR | Sapphire (some single-AR) or mineral on cheaper lines | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | 30–50 m rated | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Within ~±15–25 g | Noticeably off |
| Feature | Superclone | A grade |
|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Grittier; common rotor noise |
| Power reserve | 60–72 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L basic finishing |
| Crystal | Sapphire, decent AR | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Noticeably off |
$329.00 – $849.00Price range: $329.00 through $849.00
$379.00 – $1,159.00Price range: $379.00 through $1,159.00
$379.00 – $1,159.00Price range: $379.00 through $1,159.00
We have 500+ models not shown on website. Message us!
Order preparation & inspection
Swiss Premium Movement
Before shipping for approval
Express delivery (Tax Free)
WhatsApp us
We have 500+ models not shown on website. Message us!
Order preparation
Chronological inspection
Swiss Premium Movement
Before shipping for approval
Express delivery (Tax Free)
Superclone-grade replica watches. Swiss movements, 904L steel, sapphire crystal. Every piece QC'd before shipping.
Exclusive deals and new arrivals. No spam — just watches.