$1,159.00
$1,159.00
The Rolex Submariner 116610LN Iced Out Black is a diamond-set super clone of the classic black-dial Submariner Date, built on a 40mm case with a bezel of clear baguette stones. This replica submariner 116610ln black sits at the core of the iced-out Submariner lineup, pairing a black dial with full stone coverage across the case, bezel, and bracelet. The 116610LN reference represents the most widely recognized Submariner configuration, and this version keeps its layout while replacing every steel surface with pavé-set stones. Black and clear stones together create the highest-contrast combination available in the iced-out range.
The 116610LN was the first steel Submariner Date to carry the Cerachrom ceramic bezel. In its iced-out form, the ceramic bezel insert gets replaced with a ring of clear baguette stones that runs uninterrupted around the dial.
Black-dial iced Submariners draw a specific audience. The dial color reads as conservative enough to anchor the stones without competing for attention, which makes the overall composition easier to wear in varied settings. Rolex never produced this combination at factory level, so every iced-out 116610LN exists as an aftermarket or replica interpretation of what the watch could look like fully set. The stone alignment on the bracelet center links is where quality differences become most visible, as each row must track straight across curved link surfaces. For a contrasting stone layout on the same platform, the 116610LN with white bezel and green markers takes a different approach to the iced-out Submariner concept. Browse the full Submariner collection for every available configuration from plain steel to full pavé.
Within the iced-out Submariner range, the black 116610LN occupies the default position. Green dials make a bolder color statement, white bezels shift the visual balance toward contrast, and blue-marker versions add accent color. The straight black variant does none of those things, which is precisely its strength. It lets the stone work speak without color distraction, and the familiar black Submariner face underneath keeps the watch recognizable from across a room. The 40mm diameter keeps wrist presence manageable even with the added stone texture. This replica submariner 116610ln black remains the foundational choice for anyone starting an iced-out Submariner rotation.
The black-dial iced out 116610LN is $1,159, and that super clone is the only build we sell. For the money you get a ring of clear baguettes in place of the ceramic insert, pavé over the 40mm case and the three-link bracelet with its deployant clasp, a plain black dial whose luminous markers keep the watch readable, and a clone Cal. 3135 that runs for 48 hours on a full wind.
No, none of them are. Every baguette in the bezel and every pavé stone on the case and bracelet is a diamond-look stone, which is how a fully iced Submariner stays at $1,159; think of the setting as a frame for the black dial, not as gem value you could resell.
Other versions of this model in stock: Rolex Submariner 116610LN Black Diamond Bezel, Rolex Submariner 116610LN Water Ghost, Rolex Submariner 116610LN White Bezel.
| Feature | Superclone | AAA grade | A grade |
|---|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±10–15 s/day | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Hybrid Asian 2824/2836/Seagull base with cosmetic plates | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Slight grain; audible rotor in quiet rooms | Grittier; common rotor noise |
| Power reserve | 60–72 h | 40–55 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L with good finishing | 316L basic finishing |
| Crystal | Sapphire, decent AR | Sapphire (some single-AR) or mineral on cheaper lines | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | 30–50 m rated | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Within ~±15–25 g | Noticeably off |
| Feature | Superclone | A grade |
|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Grittier; common rotor noise |
| Power reserve | 60–72 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L basic finishing |
| Crystal | Sapphire, decent AR | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Noticeably off |
$379.00 – $999.00Price range: $379.00 through $999.00
$349.00 – $889.00Price range: $349.00 through $889.00
$399.00 – $430.00Price range: $399.00 through $430.00
We have 500+ models not shown on website. Message us!
Order preparation & inspection
Swiss Premium Movement
Before shipping for approval
Express delivery (Tax Free)
WhatsApp us
We have 500+ models not shown on website. Message us!
Order preparation
Chronological inspection
Swiss Premium Movement
Before shipping for approval
Express delivery (Tax Free)
Superclone-grade replica watches. Swiss movements, 904L steel, sapphire crystal. Every piece QC'd before shipping.
Exclusive deals and new arrivals. No spam — just watches.