$1,159.00
$1,159.00
This Rolex Submariner 116610LN Rainbow Green Markers super clone dresses the 116610LN in an iced-out configuration with green stone hour markers on a diamond-set pave dial, framed by a rainbow baguette diamond-set bezel. The 40mm case maintains the standard Submariner profile, but the combination of pave-set stones, green markers and a rainbow bezel gives this piece a character that sits somewhere between a diver watch and a custom jewelry build. A paved dial with green stone hour markers inside a rainbow bezel is not a factory combination, which makes this variant distinctly aftermarket in its design language.
Where a normal Submariner dial has round lume dots, this one has green stones, and only the triangle at 12 and the batons at 6 and 9 are left white. Around them, the rainbow bezel runs from pink and red through orange and yellow to blue and violet, so the green markers sit inside a ring of every other color. Most fully paved builds trade legibility for sparkle, and this one is no exception: it is a watch to be seen rather than a dive instrument.
The 116610LN reference closed production when Rolex transitioned to the 41mm 126610 family. That makes the 40mm case a nostalgic reference point for anyone who tracked the Submariner through its various generations. Adding stones to a 116610LN is a statement: you value the classic proportions but want them presented in a more extravagant wrapper. For a different interpretation of iced-out Submariner styling, the 116619LB with clear stone bezel pairs a navy-blue dial with clear baguettes instead of a pave dial and colored stones. Both live within the Submariner collection, offering different entry points into diamond-set dive watches.
Iced-out Submariners come in dozens of configurations, and the differentiator is almost always the bezel and marker treatment. This particular build uses green to echo the Rolex Submariner “Hulk” aesthetic, but recontextualized through green stones set into the hour positions of a paved face rather than a green dial and a monochrome ceramic insert. The result is louder than a Hulk and more colorful than a standard iced-out black. If your goal is a Submariner that nobody else at the table is wearing, this replica Submariner 116610LN accomplishes that through a combination most custom builds do not attempt.
It sells for $1,159 as a super clone, and the factory makes no A-grade of it. The figure covers a rainbow bezel running from pink and red through orange and yellow to blue and violet, a pave dial with green stone hour markers, full pave on the 40mm case and its Oyster-style bracelet, and a clone Cal. 3135 rated at 48 hours.
No, the markers are green-coloured stones rather than emeralds. Neither the rainbow baguettes nor the clear pave on the dial, case and bracelet are real gems; a rainbow bezel in natural sapphires would on its own cost far more than the whole watch. You are buying the custom look on a working clone Cal. 3135, not gem value.
Other versions of this model in stock: Rolex Submariner 116610LN Rainbow Bezel, Rolex Submariner 116610LN Green Markers, Rolex Submariner 116610LN Green-White Bezel.
| Feature | Superclone | AAA grade | A grade |
|---|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±10–15 s/day | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Hybrid Asian 2824/2836/Seagull base with cosmetic plates | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Slight grain; audible rotor in quiet rooms | Grittier; common rotor noise |
| Power reserve | 60–72 h | 40–55 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L with good finishing | 316L basic finishing |
| Crystal | Sapphire, decent AR | Sapphire (some single-AR) or mineral on cheaper lines | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | 30–50 m rated | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Within ~±15–25 g | Noticeably off |
| Feature | Superclone | A grade |
|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Grittier; common rotor noise |
| Power reserve | 60–72 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L basic finishing |
| Crystal | Sapphire, decent AR | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Noticeably off |
$349.00 – $949.00Price range: $349.00 through $949.00
$349.00 – $889.00Price range: $349.00 through $889.00
$709.00 – $780.00Price range: $709.00 through $780.00
We have 500+ models not shown on website. Message us!
Order preparation & inspection
Swiss Premium Movement
Before shipping for approval
Express delivery (Tax Free)
WhatsApp us
We have 500+ models not shown on website. Message us!
Order preparation
Chronological inspection
Swiss Premium Movement
Before shipping for approval
Express delivery (Tax Free)
Superclone-grade replica watches. Swiss movements, 904L steel, sapphire crystal. Every piece QC'd before shipping.
Exclusive deals and new arrivals. No spam — just watches.