€339.00 – €1,037.00Price range: €339.00 through €1,037.00
€339.00 – €1,037.00Price range: €339.00 through €1,037.00
Based on the M116519LN-0027 reference, this Rolex Cosmograph Daytona 116519LN Grey Dial specifies a particular dial configuration within the white gold Cosmograph Daytona family. The 116519LN series places a Cerachrom bezel on a white gold case with an Oysterflex strap, and the -0027 suffix identifies the exact dial and color combination, a steel-grey dial with three black counters, that distinguishes this piece from the dozen other 116519 variants in the catalog. At 40mm, it follows the universal Daytona sizing while the white gold construction gives it a cooler visual temperature than yellow or rose gold alternatives.
The -0027 designation within the 116519LN range points to a specific dial layout that separates this variant from others sharing the same case and movement. Dial suffixes in the Rolex catalog are the primary differentiator when case material and size remain constant across a reference family.
In the super clone, a clone Cal. 4130 with a 72-hour power reserve delivers the three-register layout at 3, 6 and 9 o’clock that the Daytona has carried since the hand-wound 6239; the A-grade runs the same layout on a Japanese automatic. The white gold case adds meaningful mass compared to Oystersteel, which you notice as a slightly heavier wrist presence. That added weight pairs well with the Oysterflex strap, which keeps the watch from shifting during movement. For a warmer palette, the yellow gold 116508 offers a bolder contrast on a matching Oyster bracelet, while yellow gold on Oysterflex is the 116518LN. Both belong to the Daytona collection and share the 40mm case diameter, but they address opposite ends of the gold spectrum.
White gold Daytonas occupy a narrow lane between the accessible steel references and the visually loud yellow or rose gold options. The metal reads as silver-toned under most lighting, which means the precious metal status stays between you and the caseback engraving. The grey dial with black counters follows the Panda logic in a softer key, a lighter main dial with darker counters, but without the stark black-and-white split. The Oysterflex adds a modern comfort factor that metal bracelets cannot match during summer wear. This replica Daytona 116519LN-0027 captures that quiet white-gold character in a specific dial variant that collectors track by suffix number.
Other versions of this model in stock: Rolex Daytona 116518LN White Dial, Rolex Daytona 116519 Slate Oysterflex and Rolex Daytona 116519 White Dial.
It is close in every visible detail: the 40mm case, black ceramic bezel, steel-grey dial with black counters at 3, 6 and 9 and the Oysterflex strap follow the genuine M116519LN-0027, and the super clone runs a clone Cal. 4130 with the same 72-hour power reserve. Our Cosmograph Daytona clone build guide lists the points where factory builds still differ, such as subdial spacing and pusher feel.
Buy the superclone at $1,159 if you want the clone Cal. 4130 movement; choose the A-grade at $379 if a Japanese automatic is enough and the look of this white gold Daytona Oysterflex copy is what matters.
| Feature | Superclone | AAA grade | A grade |
|---|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±10–15 s/day | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Hybrid Asian 2824/2836/Seagull base with cosmetic plates | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Slight grain; audible rotor in quiet rooms | Grittier; common rotor noise |
| Power reserve | 60–72 h | 40–55 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L with good finishing | 316L basic finishing |
| Crystal | Sapphire, decent AR | Sapphire (some single-AR) or mineral on cheaper lines | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | 30–50 m rated | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Within ~±15–25 g | Noticeably off |
| Feature | Superclone | A grade |
|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Grittier; common rotor noise |
| Power reserve | 60–72 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L basic finishing |
| Crystal | Sapphire, decent AR | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Noticeably off |
€313.00 – €760.00Price range: €313.00 through €760.00
€625.00 – €670.00Price range: €625.00 through €670.00
We have 500+ models not shown on website. Message us!
Order preparation & inspection
Swiss Premium Movement
Before shipping for approval
Express delivery (Tax Free)
WhatsApp us
We have 500+ models not shown on website. Message us!
Order preparation
Chronological inspection
Swiss Premium Movement
Before shipping for approval
Express delivery (Tax Free)
Superclone-grade replica watches. Swiss movements, 904L steel, sapphire crystal. Every piece QC'd before shipping.
Exclusive deals and new arrivals. No spam — just watches.