This is the Richard Mille RM 67-02 Italy replica (reference RM 67-02), the national-colourway version of the ultra-flat automatic sports model and one of the lightest Richard Mille watches in the super clone range. The genuine RM 67-02 “Italy” was built as a lightweight competition piece in the brand’s athlete line, and the super clone copies the one detail that makes it instantly readable from across a room: the green, white and red tricolore flange running around a fully skeletonised dial, set into a black Carbon TPT case that weighs almost nothing on the wrist. Collectors searching for it type the reference several ways — RM 67-02, the spaced rm67, or the zero-padded rm 067-02 — but it is always the same Italy edition.

The Italian tricolore flange — how the colourway is built

On this RM 67-02 super clone the three flag colours are not printed on a flat ring. The DLC-coated titanium baseplate that forms the “dial” is first skeletonised, then the green, white and red are carried on the raised flange and the minute track around its edge, so the tricolore frames the open movement rather than covering it. You read the hours and minutes straight through to the bridges underneath. Because the colour sits on the flange and not on a solid disc, the stripes catch light at different angles as the watch tilts — the green nearest the lugs, white across the centre, red toward the crown. It is the single feature that separates the Italy from the plain black-carbon versions, and the clone reproduces the exact stripe order so a buyer can verify it against any catalogue photo.

Clone Cal. CRMA7 and the OneWay winding behind the dial

Driving the hands is the clone Cal. CRMA7, an automatic skeletonised movement wound by a OneWay winding rotor — not a micro-rotor — that swings over the open bridges you see through the tricolore. It beats at 28,800 vph (4 Hz) on 25 jewels, and the RM 67-02 is a strictly two-hand watch: hours and minutes only, with no seconds hand and no date aperture, so nothing interrupts the skeletonised view. Power reserve on the clone is 48 hours (genuine CRMA7: ~50 hours). For the solid-flag sibling in another national colourway, compare the Zverev RM 67-02 Spain super clone, which uses a red strap over a black carbon case in the same family.

Built near 32 grams for the track

The case is the tonneau RM 67-02 shape, 38.7 mm by 47.52 mm and roughly 7.1 mm thin, formed in black Carbon TPT so the layered carbon grain shows as fine parallel lines along the flanks. At a total weight near 32 g including the strap, this is a genuinely ultra-thin skeleton watch — a lightweight carbon tonneau made for sprinters and jumpers to wear mid-competition, so it disappears on the wrist during lateral movement rather than swinging against it. Water resistance is 30 m, splash-safe but not for swimming. Within the wider RM 67 replica collection this Italy build sits alongside the other flag editions; if you want the same concept pushed to a full monochrome red, see the RM 67-02 Red Carbon super clone, and if you prefer the dated, extra-flat automatic over this two-hand sports model, the RM 67-01 titanium super clone answers the common rm 67-01 vs rm 67-02 question with a grade-5 titanium case and a date window.

Reading the hours through to the DLC-titanium baseplate

What makes the Italy legible despite the open construction is depth. Under the sapphire crystal with anti-reflective coating, the DLC-coated titanium baseplate sits dark and matte, so the white hands and the bright tricolore flange stand clear against it instead of washing out. Because there is no dial disc, your eye travels past the hands, through the skeletonised bridges, down to the baseplate and the rotor turning behind it — the whole mechanism is on show, with the green/white/red ring acting as the only frame. The clone keeps that layered read so the watch looks correct both in hand and in a loupe shot.

Red woven strap and daily wear

The strap is a red woven nylon “comfort” band, elastic and flat rather than a moulded rubber strap, matching the red of the tricolore and keeping the whole watch feather-light. It stretches slightly so the 47.52 mm case sits flush even on a thinner wrist, and the colour ties the strap to the flange so the Italy theme reads as one piece. For the background on how these calibres and cases are graded across the range, read our guide to the best Richard Mille super clones, or browse the full Richard Mille replica catalogue to compare this RM 67 super clone against the rest of the line.

Specifications

• Model: Richard Mille RM 67-02 “Italy”
• Reference: RM 67-02
• Case: black Carbon TPT, tonneau
• Case size: 38.7 x 47.52 mm, ~7.1 mm thin, ~32 g
• Dial: skeletonised, green/white/red Italian tricolore flange
• Strap: red woven nylon comfort strap
• Crystal: sapphire with anti-reflective coating
• Movement: clone Cal. CRMA7, automatic, skeletonised, OneWay rotor
• Power reserve: 48 hours (genuine CRMA7: ~50 hours)
• Water resistance: 30 m
• Functions: hours and minutes only (no seconds, no date)
• Frequency: 28,800 vph, 25 jewels

FAQ

How much does the Richard Mille RM 67-02 Italy super clone cost, and is it good value?

It is priced at $1,299, which puts this Italy edition among the more accessible ways into a carbon-cased super clone without being the cheapest Richard Mille on offer. For that price you get the clone Cal. CRMA7 automatic, the black Carbon TPT case near 32 g and the full green/white/red tricolore, so the value sits in the matched weight and colourway rather than a stripped build.

What is the difference between the RM 67-02 Italy and the RM 67-01?

The RM 67-02 is the two-hand automatic sports model — hours and minutes only, clone Cal. CRMA7, carbon case near 32 g — while the RM 67-01 is the extra-flat automatic with a date aperture at 5 o’clock and a function selector, running the clone Cal. CRMA6. In short, the 67-02 Italy is the lighter competition piece and the 67-01 is the dressier dated version.

How can you spot a fake Richard Mille RM 67 against this super clone?

Check the weight, the tricolore stripe order and the finishing under a loupe — a crude fake richard mille rm 67 gets the ~32 g feel and the green-white-red sequence wrong, whereas this super clone matches the black Carbon TPT grain and the exact flange order so it reads correctly against catalogue photos. The genuine still differs in its certified grade-5 titanium parts and movement finishing.

Does the RM 67-02 Italy have a seconds hand or a date?

No seconds, no date — the RM 67-02 keeps to two hands. It reads hours and minutes alone, a deliberate choice that leaves the open baseplate and its green/white/red flange uncluttered.