$879.00 – $1,299.00Price range: $879.00 through $1,299.00
$879.00 – $1,299.00Price range: $879.00 through $1,299.00
The Richard Mille RM 35-01 Rafael Nadal reference in this Sapphire Tiffany Blue trim is the most eye-catching version of the collection — a transparent sapphire case that lets daylight pass straight through the skeletonised movement. Where most siblings hide their architecture behind carbon or ceramic, this RM 35-01 super clone puts everything on show, which is exactly why collectors chasing a Rafael Nadal (Rafa) watch replica single it out first. Set it beside the full RM 35-01 replica collection and the sapphire build stands apart on sight.
A soft Tiffany-blue flange rings the open dial, and a single red-tipped central seconds hand sweeps over the bridges — the colour pairing that gives this piece its nickname. The open skeleton tonneau layout exposes the grade-5 titanium baseplate beneath, so the rm 35-01 reads as a miniature engine rather than a flat face. It is the one detail no other rm-35-01 in the range carries in quite the same way.
This is a manual-winding watch: the clone Cal. RMUL3 drives hours, minutes and that red central seconds hand, a true three-hand layout. Do not confuse it with the automatic RM 35-02 and 35-03 — the 35-01 is hand-wound, and you feel the difference at the crown each morning. If you want the self-winding Nadal instead, the RM 35-02 Nadal automatic super clone is the sister line; this rm 35 01 keeps the purer manual-winding skeleton feel.
The tonneau case measures roughly 44.5 x 49.94 mm yet stays among the lightest mechanical watches you can wear, thanks to the skeletonised grade-5 titanium baseplate and the sapphire crystal. A red rubber-coated crown winds it, a white rubber strap carries it, and water resistance is rated 50 m. For a different case feel, the carbon-cased RM 35-01 Black Carbon Yellow Strap super clone trades the glass case for a stealthier look, while the closest relative to this one is the RM 35-01 Sapphire Black Dial White Strap super clone.
At its listed price this Richard Mille replica sits well below a genuine sapphire-cased Nadal while copying the look faithfully, which is why shoppers hunting the cheapest Richard Mille route to a sapphire RM so often land on the 35-01. The rm-35-01 Sapphire Tiffany Blue is for sale now, and if you are still deciding on a model our best Richard Mille super clones guide ranks it against the rest of the brand’s Richard Mille replica catalogue.
This RM 35-01 Sapphire Tiffany Blue super clone is listed at $879, which undercuts a genuine sapphire-cased Nadal by a wide margin while matching its transparent-case look. The price covers the skeletonised build, the manual clone Cal. RMUL3 and the white rubber strap.
Judge a fake RM 35-01 Sapphire Tiffany Blue by its movement finishing and the precision of the Tiffany-blue flange, since the genuine RMUL3 carries a ~55-hour reserve against this clone’s 48 hours. The red-tipped central seconds and sapphire case are copied closely, so the caseback movement is the honest tell.
The RM 35-01 Sapphire Tiffany Blue is manual-winding while the RM 35-02 Nadal is automatic, so the headline difference is the movement. This 35-01 also wears a see-through sapphire case where the 35-02 uses a carbon TPT shell.
Yes — the RM 35-01 Sapphire Tiffany Blue has a central seconds hand with a red tip, alongside hours and minutes, making it a three-hand watch. That central seconds is driven by the manual clone Cal. RMUL3 beating at 28,800 vph.
| Feature | Superclone | AAA grade | A grade |
|---|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±10–15 s/day | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Hybrid Asian 2824/2836/Seagull base with cosmetic plates | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Slight grain; audible rotor in quiet rooms | Grittier; common rotor noise |
| Power reserve | 60–72 h | 40–55 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L with good finishing | 316L basic finishing |
| Crystal | Sapphire, decent AR | Sapphire (some single-AR) or mineral on cheaper lines | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | 30–50 m rated | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Within ~±15–25 g | Noticeably off |
| Feature | Superclone | A grade |
|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Grittier; common rotor noise |
| Power reserve | 60–72 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L basic finishing |
| Crystal | Sapphire, decent AR | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Noticeably off |
$329.00 – $849.00Price range: $329.00 through $849.00
$379.00 – $1,159.00Price range: $379.00 through $1,159.00
$349.00 – $889.00Price range: $349.00 through $889.00
We have 500+ models not shown on website. Message us!
Order preparation & inspection
Swiss Premium Movement
Before shipping for approval
Express delivery (Tax Free)
WhatsApp us
We have 500+ models not shown on website. Message us!
Order preparation
Chronological inspection
Swiss Premium Movement
Before shipping for approval
Express delivery (Tax Free)
Superclone-grade replica watches. Swiss movements, 904L steel, sapphire crystal. Every piece QC'd before shipping.
Exclusive deals and new arrivals. No spam — just watches.