$659.00
$659.00
At 44mm with a blue dial and leather strap, this Breitling Avenger GMT replica positions itself as one of the larger and more commanding watches in the current Breitling range. Reference A32320101C1X1 belongs to the Avenger family, which has always prioritized legibility, durability, and oversized case construction over the dressy refinement found in the Navitimer or Premier lines. The blue dial with bold luminous baton indices and a red-tipped 24-hour hand makes reading two time zones at a glance effortless in almost any lighting condition. Breitling calls it the Avenger Automatic GMT 44; the rest of the family is in the Avenger lineup explained section of our guide.
Breitling sizes the Avenger crown with a grippy, oversized profile that allows operation with gloves. The crown guard structure adds further protection, making the entire right side of the case feel purpose-built for demanding environments.
The Avenger line deliberately avoids the elegance-first approach of the Navitimer. Cases are thicker, bezels are wider, and indices are printed large enough to read from arm’s length. That makes the A32320101C1X1 a tool watch in the traditional sense, not a lifestyle accessory styled to look like one. Blue leather softens the overall impression slightly compared to a black rubber or steel bracelet option. The SB01472A1B1X1 Bloodhounds in black pushes the Avenger formula further with a chronograph, a black case of the same 44mm and a darker color scheme. The full Avenger collection here spans 43mm to 45mm in steel, two-tone and black-cased finishes.
A 44mm watch on leather wears differently than the same diameter on a bracelet: the strap absorbs more flex and sits flatter against the wrist, reducing the sensation of bulk. Blue leather also ages visually over time, developing patina that gives the watch a more personal character after several months. The Avenger line is built for wrists that can carry 44mm or above without the watch looking disproportionate. For those who meet that threshold, the A32320101C1X1 delivers home time plus a second time zone in a robust package. This blue Avenger GMT clone brings the full Avenger presence and legibility to a leather-strap format that suits both field conditions and daily commutes.
The red arrow-tipped hand turns once every 24 hours and points to the 24-hour scale printed on the dial flange, so it can hold your home time while the hour and minute hands show local time. The steel bezel carries its own 24-hour scale; turn it to line up a third zone against the same red hand. Inside, clone Cal. Breitling 32 drives the GMT hand and the date with about 40 hours of power reserve, against 42 hours for the genuine calibre.
| Feature | Superclone | AAA grade | A grade |
|---|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±10–15 s/day | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Hybrid Asian 2824/2836/Seagull base with cosmetic plates | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Slight grain; audible rotor in quiet rooms | Grittier; common rotor noise |
| Power reserve | 60–72 h | 40–55 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L with good finishing | 316L basic finishing |
| Crystal | Sapphire, decent AR | Sapphire (some single-AR) or mineral on cheaper lines | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | 30–50 m rated | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Within ~±15–25 g | Noticeably off |
| Feature | Superclone | A grade |
|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Grittier; common rotor noise |
| Power reserve | 60–72 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L basic finishing |
| Crystal | Sapphire, decent AR | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Noticeably off |
$349.00 – $849.00Price range: $349.00 through $849.00
$460.00 – $489.00Price range: $460.00 through $489.00
We have 500+ models not shown on website. Message us!
Order preparation & inspection
Swiss Premium Movement
Before shipping for approval
Express delivery (Tax Free)
WhatsApp us
We have 500+ models not shown on website. Message us!
Order preparation
Chronological inspection
Swiss Premium Movement
Before shipping for approval
Express delivery (Tax Free)
Superclone-grade replica watches. Swiss movements, 904L steel, sapphire crystal. Every piece QC'd before shipping.
Exclusive deals and new arrivals. No spam — just watches.