This Breitling Avenger red gold super clone combines red-gold-tone accents with stainless steel in a 45mm case that shifts the Avenger from pure tool watch into something with visible luxury. The two-tone treatment appears on the bezel, crown, and pushers, while the caseback and case middle remain in steel, and the watch rides on a black strap rather than a bracelet. That material split keeps the watch lighter than a full-gold piece while adding warmth that single-metal Avengers lack entirely. The genuine UB01821A1B1X1 is limited to 250 pieces; for what to wear it with, see our styling tips for the Avenger.

Specifications

• Model: Avenger B01 Chronograph 45, two-tone (genuine limited to 250 pieces)
• Reference: UB01821A1B1X1
• Case size: 45 mm
• Case: stainless steel with red-gold-tone bezel, crown and pusher caps (genuine: stainless steel and 18k red gold)
• Dial: anthracite with luminous Arabic numerals, gold-tone hands and winged logo
• Crystal: sapphire with anti-reflective coating
• Strap: black woven-pattern strap with white stitching (genuine: anthracite calfskin, steel buckle)
• Movement: clone Cal. B01, automatic chronograph (column wheel, vertical clutch), 28,800 vph
• Functions: hours, minutes, small seconds, chronograph (30-minute counter at 3, 12-hour counter at 6), date at 6
• Bezel: unidirectional, red-gold tone, 0-60 minute scale with rider tabs
• Power reserve: 55 hours (genuine Cal. B01: 70 hours)
• Water resistance: 50 m (genuine: 300 m)

The red-gold-tone bezel picks up ambient light differently than the brushed steel surfaces below it, creating a visible color break at the twelve o’clock line. Breitling applies the same two-tone formula across several Avenger references, but the UB01821A keeps the dial clean and dark.

Where Red Gold Tone Meets Brushed Steel

Two-tone execution lives or dies on the transition between metals. On this Avenger, the gold bezel sits flush against the steel mid-case with a tight seam that avoids the “aftermarket” look that plagues lesser mixed-metal watches. The anthracite dial provides neutral ground for both metals to register without competing. Compare this with the AB01821A blue leather Avenger that runs entirely in steel with a blue dial and leather strap. Both sit at 45mm, but the gold accents here add formality that a full-steel version cannot deliver. Explore the Avenger range for additional material and strap configurations in this size.

Red Gold Avenger Super Clone on a Black Strap

At 45mm with mixed metals, this reference wears with more presence than its all-steel siblings. The red gold catches sunlight and indoor lighting alike, making the watch noticeable without being loud. Breitling has always positioned the Avenger as a robust chronograph, and the two-tone version retains that tool-watch foundation while adding a dressier edge. This two-tone Avenger on its black strap bridges the gap between pilot instrument and weekend statement piece.

An Elapsed-Time Bezel, Not a Tachymeter

The red-gold-tone bezel turns in one direction and is graduated from 0 to 60 minutes, with rider tabs at 15, 30 and 45 and a pip at twelve. Set the pip against the minute hand and the bezel shows how long a meeting, a parking slot or a flight leg has run, without starting the chronograph. There is no tachymeter scale on this watch; the Avenger bezel measures elapsed time, not speed.