$879.00
$879.00
Green dial, baguette bezel and a stone-set bracelet push this Patek Philippe Cubitus 5821 style super clone far from the understated original, finished in a white-metal look throughout. The olive-like green dial paired with stone-set accents on a white-metal case makes this iced Cubitus replica one of the more distinctive variants in our Cubitus lineup. Patek Philippe’s own 5821/1A is plain steel with an olive green dial, and here the factory adds baguette-cut stones on the bezel plus pavé-set flanks and bracelet, lifting what is already a bold square sports watch into semi-jewelry territory; the indices stay plain luminous batons. The 45 mm square case anchors the entire composition, with the green dial and its horizontal embossed stripes serving as the focal point inside all that white sparkle. If you are deciding between the stone-set pieces, our guide shows where the iced 5821 variants fit.
Green and white metal is a combination that works because the cool frame lets the dial colour carry all the warmth. The stone-set bracelet links and flanks keep the olive-like green the only colour on the watch, which is likely why the factory chose this pairing.
The genuine Cal. 26-330 S C runs at 28,800 vibrations per hour and carries a silicon Spiromax balance spring; this watch uses the clone Cal. 26-330 S C, which copies its automatic winding, sweep seconds and date. Every three-hand Cubitus 5821 shares that calibre, while the grand date 5822P uses a different movement, so the time-and-date versions stay consistent regardless of exterior configuration. Power reserve is about 42 hours on the clone against 45 for the genuine, and the genuine calibre winds through a central rotor rather than a micro-rotor. Explore the full Cubitus collection to see the caliber across steel, two-tone, and stone-set configurations.
Among the stone-set Cubitus variants, the green dial version occupies a unique space. The navy-dial iced version appeals to those who prefer cooler tones, while the black version goes for maximum contrast. Green sits between those extremes, offering warmth without the full sparkle of the pavé dial with rainbow indices. The iced black-dial variant provides the starkest alternative on the same white-metal case. Since the genuine 5821/1A-001 dial is also olive green, this is the iced Cubitus whose dial colour sits closest to a real Patek catalogue piece.
Other versions of this model in stock: Patek Philippe Cubitus 5821/1A rainbow dial, Patek Philippe Cubitus 5821/1A blue dial, Patek Philippe Cubitus 5821/1A-001 green dial, Patek Philippe Cubitus 5821 black dial.
| Feature | Superclone | AAA grade | A grade |
|---|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±10–15 s/day | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Hybrid Asian 2824/2836/Seagull base with cosmetic plates | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Slight grain; audible rotor in quiet rooms | Grittier; common rotor noise |
| Power reserve | 60–72 h | 40–55 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L with good finishing | 316L basic finishing |
| Crystal | Sapphire, decent AR | Sapphire (some single-AR) or mineral on cheaper lines | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | 30–50 m rated | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Within ~±15–25 g | Noticeably off |
| Feature | Superclone | A grade |
|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Grittier; common rotor noise |
| Power reserve | 60–72 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L basic finishing |
| Crystal | Sapphire, decent AR | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Noticeably off |
$329.00 – $849.00Price range: $329.00 through $849.00
$379.00 – $1,159.00Price range: $379.00 through $1,159.00
$840.00 – $1,399.00Price range: $840.00 through $1,399.00
We have 500+ models not shown on website. Message us!
Order preparation & inspection
Swiss Premium Movement
Before shipping for approval
Express delivery (Tax Free)
WhatsApp us
We have 500+ models not shown on website. Message us!
Order preparation
Chronological inspection
Swiss Premium Movement
Before shipping for approval
Express delivery (Tax Free)
Superclone-grade replica watches. Swiss movements, 904L steel, sapphire crystal. Every piece QC'd before shipping.
Exclusive deals and new arrivals. No spam — just watches.