$329.00 – $1,149.00Price range: $329.00 through $1,149.00
$329.00 – $1,149.00Price range: $329.00 through $1,149.00
This iced out Rolex Datejust 41 diamond dial replica is built on reference 126300, the 41 mm Oystersteel Datejust that Rolex released in 2016. On this configuration the plain factory dial and smooth bezel give way to a fully iced build: a pavé diamond dial in white/silver with applied Arabic numerals, framed by a diamond-set bezel. It keeps every Datejust signature — the date at 3 o’clock under a Cyclops lens and the five-link Jubilee bracelet in Oystersteel. This is an aftermarket super clone iced configuration rather than a catalogue Rolex SKU, so the stones are hand-set onto the base 126300 after the watch is assembled.
The dial is the whole point of this piece. Instead of a sunburst or fluted-motif face, the entire surface is pavé — a dense bed of small round stones set edge to edge across a white/silver base, so the dial reads as one continuous sheet of sparkle. Applied Arabic numerals sit on top of the pavé field rather than being printed, giving the markers depth and keeping the hour positions legible against the glitter. The bezel stones continue the same bright-white tone around the rim, and because the base metal is Oystersteel the surround stays cool and neutral, which is what keeps the pavé looking white rather than warm. These are hand-set simulated stones on a genuine-specification case, honest about what an iced super clone build is.
If you want the same 41 mm Oystersteel proportions without the full ice, the clean-dial route is the comparison point: a reference like the Datejust 41 126334 with a white Roman dial gives you crisp applied markers, a fluted white-gold bezel and no dial stones, a dressier and quieter look. The 126300 pavé here trades that restraint for maximum presence: a diamond-set bezel plus a pavé field in place of a flat dial, so it photographs far brighter under light and sits firmly in iced-out territory rather than everyday Datejust.
No — the dial pavé and the bezel are aftermarket-set simulated stones applied to the 126300 base watch, which is why it is sold as a super clone iced configuration and not a factory reference. The 41 mm Oystersteel case, Cyclops date and Jubilee bracelet all follow genuine 126300 proportions.
It runs an automatic clone Cal. 3235 or an A Grade Japanese automatic, carrying a 70-hour power reserve in line with the genuine Datejust 41 calibre. Water resistance is rated at 30 m.
From normal wearing distance it tracks the real 126300 closely — same case size, Cyclops, numeral layout and Jubilee links. The honest tell is the pavé itself: these are set stones, so a jeweller with a loupe is the realistic point at which it is identified, not a glance across a table.
Other versions in stock: the full Datejust 41 range, the Datejust 41 126334 mint dial and the 126334 mint-dial Jubilee.
| Feature | Superclone | AAA grade | A grade |
|---|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±10–15 s/day | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Hybrid Asian 2824/2836/Seagull base with cosmetic plates | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Slight grain; audible rotor in quiet rooms | Grittier; common rotor noise |
| Power reserve | 60–72 h | 40–55 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L with good finishing | 316L basic finishing |
| Crystal | Sapphire, decent AR | Sapphire (some single-AR) or mineral on cheaper lines | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | 30–50 m rated | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Within ~±15–25 g | Noticeably off |
| Feature | Superclone | A grade |
|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Grittier; common rotor noise |
| Power reserve | 60–72 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L basic finishing |
| Crystal | Sapphire, decent AR | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Noticeably off |
$329.00 – $849.00Price range: $329.00 through $849.00
$379.00 – $1,159.00Price range: $379.00 through $1,159.00
$999.00 – $1,799.00Price range: $999.00 through $1,799.00
$399.00 – $430.00Price range: $399.00 through $430.00
$349.00 – $889.00Price range: $349.00 through $889.00
We have 500+ models not shown on website. Message us!
Order preparation & inspection
Swiss Premium Movement
Before shipping for approval
Express delivery (Tax Free)
WhatsApp us
We have 500+ models not shown on website. Message us!
Order preparation
Chronological inspection
Swiss Premium Movement
Before shipping for approval
Express delivery (Tax Free)
Superclone-grade replica watches. Swiss movements, 904L steel, sapphire crystal. Every piece QC'd before shipping.
Exclusive deals and new arrivals. No spam — just watches.